Closers · Panic bars · Locks · Hinges
Commercial Door Repair in Toronto & the GTA
Storefront and steel doors that slam, drag, will not latch, or will not lock. We repair closers, hinges and pivots, panic hardware, and locks so the door closes and secures the way it should.
- Storefront and steel doors
- Closers, pivots, and hinges
- Panic bars and exit hardware
- After-hours service available

Fix N Clean repairs commercial entry and exit doors for retail, office, restaurant, warehouse, and multi-unit properties across Toronto, North York, Scarborough, Etobicoke, Mississauga, Vaughan, Markham, Richmond Hill, and Brampton. Work covers aluminium storefront doors and steel doors: closers, hinges and pivots, panic bars, locks, weather seals, and door glass. Broken glass in or beside the door is handled under storefront glass repair. Call (365) 360-4168 to book a visit.
What to look for
Signs a commercial door needs service
A door that does not close and latch by itself is a security problem and a liability.
- The door slams shut, or closes too slowly to latch
- Oil leaking from the door closer
- The door drags on the threshold or rubs the frame
- The latch or lock no longer lines up
- A panic bar that sticks, will not retract, or will not relatch
- Sagging on the pivot or hinge side
- Drafts, daylight, or water at the bottom of the door
- A key that is hard to turn, or a cylinder that spins
Door closers
The closer controls how fast the door swings shut and how firmly it latches. A closer that is leaking oil has failed and needs replacing. One that slams or stalls can often be corrected by adjusting its closing and latching speeds.
A properly set closer shuts the door fully without slamming, which protects the frame, the glass, and anyone walking through.
Hinges, pivots, and alignment
Aluminium storefront doors hang on pivots or continuous hinges that carry a heavy glass door through thousands of cycles. When a pivot wears, the door drops, drags on the threshold, and stops latching. Steel doors show the same symptoms when hinges loosen or the frame is knocked out of square by carts and deliveries.
We replace worn pivots and hinges, re-hang and align the door, and reset the strike so the latch engages.
Panic bars and exit hardware
An exit door has to open freely from inside in one motion, and it has to latch again when it closes. A panic bar that sticks or fails to relatch is both a safety problem and a security gap.
We repair and replace exit devices from Von Duprin, Falcon, and Detex, and check that the door, closer, and strike are working together afterwards.
Locks, keys, and access
Mortise locks, storefront latches, and cylinders are repaired, rekeyed, or replaced. When staff change, rekeying is cheaper than new hardware: see lock rekeying. Larger sites can move to a master key system or keypad and card access, so one credential can be removed without touching the lock.
Locked out of the premises? See emergency lockout service. For a door damaged in a break-in, the opening can be secured with an emergency board-up while parts are ordered.
Step by step
How a commercial door repair works
Scheduled around your trading hours where possible.
Describe the problem
Send photos of the door and hardware, or a short video of the door closing.
Site assessment
The door, frame, closer, pivots or hinges, exit device, and lock are checked together.
Written quote
You get the scope, parts, and price in writing before work begins.
Repair
Parts are replaced and the door is re-hung and aligned, after hours if that suits the business.
Test
The door is tested to confirm that it closes, latches, locks, and opens freely from inside.
Transparent pricing
Commercial door repair cost
Published starting prices. Commercial work is quoted per door in writing.
| Service | Price Range (CAD) | Timeline |
|---|---|---|
| Commercial door repair | From $180 | Quoted per door |
| Panic bar & fire exit hardware | From $280 | Quoted per door |
| Storefront glass replacement | From $900 | Made to order |
| Emergency board-up | $150 – $400 | 24/7 availability |
| Master key systems & access control | Custom quote | Scoped per site |
What changes the price
- Aluminium storefront door or steel door
- Parts: closer, pivot set, hinge, exit device, or lock
- Condition of the door and frame
- After-hours access and site rules
- Number of doors serviced in one visit
Request a written quote with photos and your city, or call (365) 360-4168.
Coverage
Commercial Door Repair across the GTA
Common questions
Commercial Door Repair FAQ
The door closer is out of adjustment or has failed. If there is oil on the closer body or arm, it has lost its hydraulic fluid and needs replacing. Otherwise the closing and latching speeds can usually be reset.
Commercial door repair starts from $180, and panic bar or fire exit hardware work from $280. The price depends on the parts required and the type of door, and is quoted in writing before work begins.
Yes. The usual causes are a door that has dropped on worn pivots or hinges, a misaligned strike, or a failing latch. The door is realigned first, then the lock or latch is repaired or replaced if it is still needed.
Yes. We repair and replace panic exit devices, including Von Duprin, Falcon, and Detex, and check that the door closes and relatches correctly afterwards.
We repair commercial swing and sliding entry doors, their hardware, and their glass. For automatic door operators, call us and we will tell you whether it is work we can take on or whether you need an automatic-door specialist.
Yes. Repairs can be scheduled overnight or early in the morning to avoid disrupting your business, with no surcharge for after-hours work.
24/7 dispatch · Toronto & GTA
Ready for a written quote?
Call or text (365) 360-4168 for current availability, or send photos through the quote form and get the scope and price in writing before work begins.
