Replacement windows · Free quote

Window Replacement & Installation in Toronto & the GTA

New windows measured to the opening, installed, sealed, and finished inside and out. We tell you when a repair will do and when replacement is the better use of your money.

  • Free in-home measurement
  • Double- and triple-pane options
  • Written scope and price
  • Old windows removed
Black-framed floor-to-ceiling windows in a sunroom overlooking the water
Toronto & Greater Toronto AreaClean, measured installation

Fix N Clean installs replacement windows in houses, townhomes, and condos across Toronto, North York, Scarborough, Etobicoke, Mississauga, Vaughan, Markham, Richmond Hill, and Brampton. Vinyl double- and triple-pane windows with low-E glass are quoted per opening after an on-site measurement. If only the glass has failed, a sealed-unit replacement may solve the problem for much less. Call or text (365) 360-4168 to book a measurement.

Repair or replace

Signs it is time to replace rather than repair

A glass problem is usually a repair. A frame problem is usually a replacement.

  • Frames that are soft, rotted, warped, or cracked
  • Water staining on the wall or sill below the window
  • Drafts you can feel with the window closed and locked
  • Sashes that will not open, stay open, or lock
  • Several sealed units fogging in the same set of windows
  • Single-pane or early double-pane windows you want to upgrade

Repair or replace: how we decide

Not every window problem needs a new window. Fog between the panes, a cracked pane, a broken crank, and a torn screen are all repairs. Replacement is the better call when the frame itself has failed, water is getting into the wall, hardware is obsolete, or the windows are old enough that repairs keep adding up.

During the visit we look at the frame, sill, sash operation, and the wall around each opening, then quote the option that fits. Often that means replacing some openings and repairing others.

Retrofit and full-frame installation

There are two ways to install a replacement window. A retrofit, or insert, installation fits a new window inside the existing frame. It is faster and leaves interior trim largely untouched, but it depends on the old frame being solid and square.

A full-frame installation removes everything down to the rough opening, so the opening can be inspected, insulated, and sealed before the new window goes in. It costs more and includes new interior trim and exterior capping, and it is the right method where there is rot or water damage. Your quote states which method is being priced.

Glass and frame options

Most replacement windows in GTA homes are vinyl, which insulates well and needs little upkeep. The choices that affect comfort and price are in the glass: double-pane or triple-pane, low-E coatings that reflect heat, and argon gas between the panes. Triple-pane costs and weighs more; it earns its place on cold north-facing walls, in bedrooms on busy streets, and across large glass areas.

Styles include casement, awning, single- and double-hung, slider, fixed picture, and bay or bow units. Ask about ENERGY STAR options for your home.

What installation day looks like

Floors and furniture near the openings are covered. Windows are replaced one opening at a time: the old unit comes out, the new one is set level and square, fastened, insulated around the perimeter, and sealed outside before the installers move on.

Interior trim and exterior capping are finished, old windows and debris are taken away, and each window is opened, closed, and locked with you before we leave. Replacing the front door at the same time? See entry door installation. Sliding door sticking? See patio door repair.

Step by step

How a window replacement is quoted and installed

From first photos to the final walkthrough.

  1. Request a quote

    Send your city, the number of openings, and photos of the windows from inside and outside.

  2. In-home measurement

    We measure each opening, check the frame and wall condition, and go through style and glass options.

  3. Written quote

    The quote lists the window system, glass package, installation method, finishing, and disposal for each opening.

  4. Order

    Windows are built to the confirmed measurements, typically one to two weeks after ordering.

  5. Installation and walkthrough

    Windows are installed, sealed, and finished, and you check the operation of each one.

Transparent pricing

Window replacement cost

Published ranges per opening. Your quote is confirmed in writing after measuring.

ServicePrice Range (CAD)Timeline
New window installation (per opening)$650 – $1,800Order + 1–2 weeks
Foggy window sealed-unit replacement$149 – $25024–48 hrs for glass
Double-pane thermal unit (IGU)$175 – $32024–48 hrs for glass
Window screen (custom-cut)$45 – $95Same day

What changes the price

  • Window size and style: fixed, slider, casement, or bay
  • Double- or triple-pane glass and low-E package
  • Retrofit or full-frame installation
  • Condition of the existing frame and rough opening
  • Interior trim and exterior capping
  • Number of openings and floor level

Request a written quote with photos and your city, or call (365) 360-4168.

Coverage

Window Replacement across the GTA

Toronto
North York
Scarborough
Etobicoke
Mississauga
Vaughan
Markham
Richmond Hill
Brampton
Oakville
Burlington
Ajax

Common questions

Window Replacement FAQ

24/7 dispatch · Toronto & GTA

Ready for a written quote?

Call or text (365) 360-4168 for current availability, or send photos through the quote form and get the scope and price in writing before work begins.