24/7 emergency line · Forced-entry repair

Break-In & Kicked-In Door Repair in Toronto & the GTA

A kicked-in door usually fails at the frame, not the lock. We rebuild the split jamb, reinforce the strike and hinges, replace damaged locks, and leave the door closing and locking properly.

  • 24/7 emergency line
  • Frame, door, and lock in one visit
  • Reinforced strike and hinges
  • Photos and invoice for insurance
White steel entry door fitted at night on a brick home
Toronto & Greater Toronto AreaClean, measured installation

Fix N Clean repairs doors and frames damaged by forced entry across Toronto, North York, Scarborough, Etobicoke, Mississauga, Vaughan, Markham, Richmond Hill, and Brampton. A typical repair rebuilds the split jamb, reinforces the strike area, and fits a new deadbolt. If the door cannot be made secure on the first visit, the opening is boarded up until parts arrive. Call (365) 360-4168 for current availability and an ETA.

Emergency Service · 24/7

Door Kicked In or Will Not Lock?

Call with the address and photos if it is safe. We confirm current availability and an ETA, then assess the frame, jamb, hinges, strike, and lock and quote the repair before starting.

Call (365) 360-4168

Before we arrive:

  1. 01Do not go inside if someone may still be there; call 911
  2. 02Report the break-in to police and note the report number
  3. 03Photograph the door, frame, and lock before moving anything
  4. 04Do not force the door closed; it can make the damage worse
  5. 05Stay with a neighbour or in your car if the home cannot be secured

Forced-entry damage

Damage we repair after a break-in

Most of it is in the frame. The lock is often the only part still intact.

  • A jamb split along the latch side where the deadbolt tore out
  • A strike plate ripped out of the frame
  • A door slab cracked or delaminated around the lock
  • Hinges bent or pulled out of the frame
  • A deadbolt or handle set that is damaged or no longer trustworthy
  • Broken glass in the door, a sidelight, or a nearby window

Why doors fail at the frame

On most houses the deadbolt throws into a thin strike plate held by short screws in a softwood jamb. When the door is kicked, the bolt usually holds and the wood around it splits.

That is why replacing the lock alone does not fix a kicked-in door, and why a repair done properly should leave the frame harder to force than it was originally.

What the repair involves

We assess the jamb, strike area, hinges, door slab, and lock together. Split sections of the jamb are rebuilt or replaced, a heavy-gauge strike is installed and fastened with long screws through the jamb into the wall framing, and the hinge side is checked and secured the same way. Damaged locks are replaced, then the door is adjusted so it closes, latches, and seals.

If the slab is split through or the frame cannot be saved, we quote a replacement instead: see entry door installation. Damage limited to the frame is covered under door frame repair.

Locks and keys after a break-in

If keys were taken, or you are not sure who has copies, the remaining locks should be rekeyed so old keys stop working. Damaged or low-grade locks are replaced with a solid deadbolt.

Both can be done during the door repair. See lock rekeying and lock changes for the difference and the cost of each.

Insurance and documentation

Take photos before anything is moved, and keep the police report number. You get a written scope and price before work starts, and we can supply project photos and an itemized invoice for your claim.

Broken glass in or beside the door is handled on the same call through emergency glass repair.

Step by step

How a break-in door repair works

The goal of the first visit is a door that closes and locks.

  1. Call the emergency line

    Give the address and describe the damage. Text photos of the door, frame, and lock if it is safe.

  2. Availability and ETA

    The dispatcher confirms current availability and an estimated arrival time.

  3. Assessment and written quote

    The frame, jamb, hinges, strike, slab, and lock are checked and the repair is priced before work begins.

  4. Repair and reinforce

    The jamb is rebuilt, the strike and hinges are reinforced into the framing, and damaged locks are replaced.

  5. Test and hand over

    The door is closed, latched, and locked with you, and any new keys are handed over.

Transparent pricing

Break-in door repair cost

Published ranges. The written quote is confirmed on site once the damage has been assessed.

ServicePrice Range (CAD)Timeline
Full kick-in repair package$200 – $45060–120 min
Frame & jamb repair$150 – $350Same day
Lock & deadbolt replacement$95 – $22030–60 min
Door security reinforcement$180 – $350Same day
Standalone board-up$75 – $15024/7 availability

What changes the price

  • How far the jamb and frame have split
  • Whether the door slab is damaged
  • Number and grade of locks replaced
  • Steel, fibreglass, or wood door and frame
  • Glass or sidelight damage
  • Temporary board-up if parts must be ordered

Request a written quote with photos and your city, or call (365) 360-4168.

Coverage

Break-In Door Repair across the GTA

Toronto
North York
Scarborough
Etobicoke
Mississauga
Vaughan
Markham
Richmond Hill
Brampton
Oakville
Burlington
Ajax

Common questions

Break-In Door Repair FAQ

24/7 dispatch · Toronto & GTA

Need it secured today?

Call or text (365) 360-4168 for current availability, or send photos through the quote form and get the scope and price in writing before work begins.