Steel · Fibreglass · Wood entry doors

Entry Door Installation & Replacement in Toronto & the GTA

A new front door measured to the opening, hung square, sealed against the weather, and fitted with solid hardware. Steel, fibreglass, and wood systems, with sidelights and glass inserts where you want them.

  • Free in-home measurement
  • Steel, fibreglass, and wood
  • Reinforced strike plate
  • Old door removed
New white entry door with a half-lite window installed in a brick home
Toronto & Greater Toronto AreaClean, measured installation

Fix N Clean installs and replaces entry doors on houses and townhomes across Toronto, North York, Scarborough, Etobicoke, Mississauga, Vaughan, Markham, Richmond Hill, and Brampton. Each system is quoted after measuring the opening, with the door, frame, weather sealing, and hardware listed in writing. Not sure the door needs replacing? A frame and hinge repair may be enough. Call or text (365) 360-4168 to book a measurement.

Repair or replace

Reasons to replace an entry door

If new weatherstripping and a hinge adjustment will not fix it, the door or frame has reached the end of its life.

  • Drafts or daylight around the door even with new weatherstripping
  • A slab that is warped, dented, rusted, or delaminating
  • Rot in the frame or sill
  • Water staining on the floor inside the threshold
  • A door that was forced and no longer feels secure
  • Fogged or cracked glass inserts

Choosing a door material

Steel doors are strong, affordable, and insulated with a foam core; they can dent, and will rust if a damaged finish is left unrepaired. Fibreglass doors resist dents, do not rust or rot, insulate as well as steel, and come smooth or with a wood-grain texture that takes stain; they cost more.

Solid wood has a look nothing else quite matches, but it needs regular finishing and is the least forgiving of sun and moisture. For most GTA homes the decision is between steel and fibreglass, and we price both when asked.

Pre-hung systems and the frame

Most replacements use a pre-hung system: a new slab already mounted in a new frame, with its sill and weatherstripping. Replacing the frame along with the door is what fixes the drafts, leaks, and security problems that come from a tired old frame.

If the existing frame is solid and square, a slab-only replacement is possible, but the new door has to be prepared to match the old hinge and lock positions, so it suits fewer homes than people expect. Sidelights and transoms are measured and ordered as part of the same unit.

Security and hardware

A door is only as strong as the way its frame is fastened. Our entry door installations include a reinforced strike plate, and long screws at the strike and hinges tie the frame into the wall framing.

You choose the handle set and deadbolt, or we fit hardware you supply. Keypad and app-controlled deadbolts can be installed with the door: see smart lock installation.

Sealing and finishing

The frame is set level and plumb, shimmed, and fastened. The gap around it is insulated, and the exterior is sealed and capped. Inside, the casing is installed and the threshold is adjusted so the door seals without dragging. The old door and frame are taken away.

If your current door is only drafty, our drafty front door guide explains what weatherstripping can fix before you commit to a new one. Replacing windows as well? See window replacement.

Step by step

How an entry door installation works

Measured once, ordered once, installed in a day.

  1. Request a quote

    Send your city and photos of the door from inside and outside.

  2. In-home measurement

    We measure the opening and wall depth, note the swing, and check the frame, sill, and any sidelights.

  3. Written quote

    The quote lists the door system, glass, hardware, sealing, finishing, and removal of the old door.

  4. Order

    The door is ordered to the confirmed size and options. Lead time is given with your quote.

  5. Installation and walkthrough

    A standard entry door is normally installed in one day. You test the door, lock, and seals before we leave.

Transparent pricing

Entry door installation cost

Published ranges. Your written quote is for the exact system chosen.

ServicePrice Range (CAD)Timeline
New entry door installation$650 – $1,8001 day
Door security reinforcement$180 – $350Same day
Lock & deadbolt replacement$95 – $22030–60 min
Frame & jamb repair$150 – $350Same day

What changes the price

  • Steel, fibreglass, or wood
  • Single door, or a door with sidelights or a transom
  • Glass inserts and decorative glass
  • Pre-hung system or slab-only replacement
  • Condition of the rough opening and sill
  • Hardware: handle set, deadbolt, or smart lock

Request a written quote with photos and your city, or call (365) 360-4168.

Coverage

Entry Door Installation across the GTA

Toronto
North York
Scarborough
Etobicoke
Mississauga
Vaughan
Markham
Richmond Hill
Brampton
Oakville
Burlington
Ajax

Common questions

Entry Door Installation FAQ

24/7 dispatch · Toronto & GTA

Ready for a written quote?

Call or text (365) 360-4168 for current availability, or send photos through the quote form and get the scope and price in writing before work begins.